(a) Turn on the main power supply and switch on the load;

(b) Open the key switch on the main control device;

(c) Hold down the switch of loading state on the main control device to make the working state of the battery separator change from PAUSE to WORK;

(d) Turn on the computer and run the simulation test program.

Adjust the probe distance of the lithium battery automatic sorting machine to be consistent with the distance between the moment slots of the tested battery. Let the xenon lamp of the sorter flash 5-10 times, calibrate the sorter with the standard sheet, and then test the battery sheet, and calibrate the test stand with the standard battery sheet before the test and sorting the battery sheet. After the test sorting, it is necessary to sort out the cells. It is forbidden to mix the solar cells with different power and classify them with 0.1W. During the test, the operator must wear a finger sleeve. It is forbidden to do the test sorting without a finger sleeve. When taking and putting the battery, it should be light as far as possible. Cell sorting is the first and important process in the production of battery components.